Tag: Bonsai

Placement

The Jade is considered an indoor tree in most temperate zones, although it can be grown outdoors in full sun and high temperatures. Do not let temperatures drop below 40 °F (5 °C). It requires substantial light, full sun if possible, especially when kept indoors. You’ll know if your Jade tree is getting enough sunlight when it’s leaves develop red tips or edges.

Watering

Jade trees can hold large amounts of water inside their leaves, so water sparsely and allow the plant to dry out a little between watering. If the tree is kept relatively cold during winter months, watering can be done as seldom as once every three weeks. Monitor your tree closely and water the moment the soil dries out. The Jade Bonsai is not as particular about over-watering as most other succulents.

Fertilizing

Fertilize your Jade tree once a month, spring through autumn, during the growth season. Any normal fertilizer, as described in our fertilize section, should be fine.

Pruning and wiring

Because the Jade tree is a succulent, it retains water in its trunk and branches. The water retention makes the tree limbs heavy which naturally bends the trunk and branches. It responds very well to pruning, and you should prune it regularly to force it to grow branches, especially in the lower part of the trunk. Do not use cut-paste on Jade trees. The nature of its trunk and branches make it very susceptible to rotting. The bark is very soft, so be cautious when wiring. If you do wire your Jade tree, make sure to monitor it closely as the wire will cut into the bark quickly.

Re-potting

Re-potting a Jade tree should be done every-other-year in spring. Be sure to use a well-draining soil mixture and don’t water the soil for about a week after re-potting. This allows the cut or damaged roots to dry and callous. Watering after re-potting leads to root rot, which can severely damage your jade tree.

Propagation

Jade trees are particularly easy to propagate using cuttings. This should be done during the summer months.

Pests and diseases

The Jade is strong when it’s watered correctly and is receiving sufficient sunlight. If taken care of, you should not experience any issues with its health.

Placement

The ficus is an indoor tree that does not endure frosty conditions. It can be kept outside in the summer as long as temperatures are above 60°F (15°C). It requires a lot of light, preferably full sunlight, so be sure not to place it in a shady location. The temperature should be kept relatively constant. Figs can endure low humidity due to their thick, waxy leaves, but they prefer higher humidity and need extremely high humidity to develop aerial roots.

Watering

Ignore labels stating your Ficus needs watering every day, you need to water on observation. The Ficus should be watered generously whenever the soil gets slightly dry. The Bonsai Ficus prefers room temperature soft water and it can tolerate occasional over, or under watering. We advise daily misting to maintain humidity, but too much misting can create fungal problems. The warmer the placement of the fig during winter, the more water it needs. If it’s kept in a cooler place it only needs to be kept slightly moist. Continue reading about watering Bonsai trees.

Fertilizing

Fertilize every two weeks during summer, and every four weeks during winter if the growth doesn’t stop. Liquid fertilizer can be used as well as organic fertilizer pellets.

Pruning and wiring

Regular pruning is necessary to retain the tree’s shape. Prune back to 2 leaves after 6-8 leaves have grown. Leaf pruning (defoliation) can be used to reduce leaf size, as some Ficus Bonsai species normally grow large leaves. If a considerable thickening of the trunk is desired, the Ficus can be left to grow freely for one or two years. The strong cuts that are necessary afterward don’t affect the Ficus’ health and new shoots will grow from old wood. Larger wounds should be covered with cut paste. Continue reading about pruning Bonsai trees.

Wiring and bending thin to medium Ficus branches is easy due to their flexibility, but you should check the wires regularly as they can cut into the bark very quickly. Strong branches should be shaped with guy-wires because they can be left on the tree for a much longer period.

Repotting

Repot your Ficus tree during the spring, every other year, using a basic Bonsai soil mixture. Ficus tolerates root-pruning very well. Continue reading about re-potting Bonsai trees.

Propagation and grafting

Cuttings can be planted at any time of the year, but they have the highest success rate during mid-summer growth. Air-layering will work best during spring, in April through May. In most cases, springtime is the best time for planting Ficus seeds.

Ficus trees can fuse by placing branches, roots, or trunks together and applying some pressure. This technique is known as approach-grafting and it can be used to form appealing structures. You can tie many young plants together to fuse them and build a single strong trunk. Fig tree branches and roots can also be grafted quite easily. If the growing conditions are ideal, you can even take aerial roots from one part of the tree and graft them into a different position. For faster healing, or closing of large wounds, young plants, shoots, or aerial roots can be grafted across wounds. An experienced grower can work on fig trees with a nearly unlimited range of creative freedom, which considerably increases the appeal of growing Ficus retusa as a Bonsai plant.

Pests and diseases

Fig species are quite resistant against pests, but they are still susceptible to several issues depending on their location, and time of year, especially in the winter. Dry air and a lack of light weakens the Bonsai Ficus and often result in leaf drop. In poor conditions like these, they are sometimes infested with scale or spider mites. Placing customary insecticide sticks into the soil or spraying insecticide/miticide will get rid of the pests, but a weakened Ficus tree’s living conditions must be improved. Using plant lamps 12 to 14 hours a day, and frequently misting the leaves will help in the recovery process. For more detailed information on these techniques.

There are a multitude of reasons why roses remain the universally celebrated floral symbol of romance – it could be the sculptural silhouette, the velvety petals – or the sweet scent. McQueens cupid’s revel crafting these iconic stems into seriously heart-fluttering forms – from the signature crimson Naomi variety to the summery Sweet Avalanche – we can’t get enough of this bloom in all its gorgeous guises. Meet some of our most beloved Valentine’s designs – each giving the rose a new incarnation. Which one will you choose?

Placement

The bougainvillea needs full sun and high temperatures for producing flowers and for that reason it should be placed outside in a sunny place during the growing season. In autumn the tree should be taken into a cool room with sufficient light (or under grow lights) and at temperatures not below 50°F / 10° C and best not over 59° F / 15° C, which is unfortunately not easy to achieve in many houses.

Watering

Water the bougainvillea thoroughly when the soil gets dry, but avoid constant soil wetness which will lead to root rot, fungal problems, insect susceptibility and death. The species prefers a pH value of 6 to 6.5, so avoid using highly calcareous water. Continue reading about watering Bonsai trees.

Fertilizing

Apply solid organic fertilizer once a month or use a liquid fertilizer every week during the growing season and every two weeks in winter.

Pruning and wiring

Cut the shoots after flowering, leaving two leaves on each and prune twigs and branches in autumn or winter. The bougainvillea can bud from old wood after hard pruning. If you want the tree to flower, don’t pinch and trim it too much in summer. Use cut paste on larger cut wounds. Those heal over slowly. Wiring is possible on young shoots and twigs but older branches are very stiff and break easily. Beware of the thorns when you are wiring bougainvilleas.

Re-potting

Re-pot smaller bougainvilleas every two or three years. Larger specimens can be re-potted every three to five years. A well-draining standard soil mix is fine for this species. The roots of the bougainvillea are yellow, thin and delicate. Take good care not to tear off the roots when you remove the root-ball from the pot! Untangle the roots tenderly and don’t use the root rake with force. Root pruning is tolerated

Propagation

The bougainvillea can be propagated from cuttings. Best results are achieved in spring and summer with semi-hardwood cuttings or root cuttings. Air-layering is also possible. For more detailed information on these techniques

Pests and diseases

The bougainvillea tends to be pest resistant as long as is kept healthy and free from wet soil conditions or lack of light. Weak plants can be attacked by powdery mildew, aphids, scale, mealy bug, white fly or caterpillars. In that case use specific pesticides and try to improve the conditions for your tree. When the flowers wilt, cut them off to prevent rot.